IG KIt - IrriGRAY irrigation kit
IrriGRAY gets the graywater where you need it, with a minimum of fuss. Low filtration requirements mean that coarse filters can be used (40 mesh or less), resulting in less cleaning. Fast drip rates (2.0 gph per emitter) mean that 300' of IrriGRAY dripperline tubing will irrigate at 10 gallons per minute - faster than your house will create the graywater, so loss of water to overflow in the pumping system is minimzed.
Simple to install, either DIY or Pro.
300' 16mm Irrigray Dripperline (2 x 150' coils)
150' 3/4" LDPE Supply Line (1 x 150' coil)
1 IrriGRAY filter (including 2 x 3/4" Male Thread x 3/4" Insert fittings)
2 3/4" Insert Tees
5 3/4" Insert Elbows
3 3/4" Plugs
20 16mm Barbed Insert takeoffs
1 Hole Punch to suit 16mm takeoff fittings
15 16mm Figure 8 Ends
1 Installation Instructions (CD)
JWSUSA Irrigray Kit Brochure (PDF)
IrriGRAY Installation Instructions (PDF)