Loading... Please wait...

Our Newsletter

IrriGRAY Kit Graywater Irrigation for the Aqua2Use (pumped)

  • Aqua2Use greywater drip irrigation kit
IG KIT - Aqua2Use
Usually ships within 48 hours.
Calculated at checkout

Product Description

IrriGRAY gets the graywater where you need it, with a minimum of fuss. Low filtration requirements mean that coarse filters can be used (40 mesh or less), resulting in less cleaning. Fast drip rates (2.0 gph per emitter) mean that 150' of IrriGRAY dripperline tubing will irrigate at 5 gallons per minute - so loss of water to overflow in the pumping system is minimzed.

Apart from being super easy and quick to install, IrriGRAY wont clog like standard dripperline. With standard dripperline, even highly filtered graywater (150 mesh or more) will still clog result in clogging over time. This is because dissolved soaps and detergents form a film on the small emitters when drying.

IrriGRAY emitters are wide enough to ensure the film is dissolved and washed away each time. IrriGRAY - the #1 graywater dripperline in Australia, proven over 8 years in 100,000's of gardens.

Simple to install, either DIY or Pro.


150' 16mm Irrigray Dripperline  (1 x 150' coils)
150' 3/4" LDPE Supply Line (1 x 150' coil)
2 3/4" Insert Tees
5 3/4" Insert Elbows
3 3/4" Plugs
10 16mm Barbed Insert takeoffs

10 16mm Figure 8 Ends1 Hole Punch to suit 16mm takeoff fittings

1 Installation Instructions 

1 Aqua2Use to mainline adaptor assembly

Find Similar Products by Tag

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Add to Wish List

Click the button below to add the IrriGRAY Kit Graywater Irrigation for the Aqua2Use (pumped) to your wish list.

You Recently Viewed...